DT Swiss PR 1600 Spline 32 Disc
Details
The PR 1600 SPLINE 32 is characterized by its super stiff yet lightweight medium-profile aluminum rim. The use of the PHR nipple system allows a very low weight. Stiffness is generated via the big cross-section and, thanks to the 18mm internal width and the tubeless-ready design, it is ideally equipped for the use of modern road bike tires. The PR 1600 SPLINE 32 is a wheel that excels on any terrain, transfers every bit of energy into forward momentum, and takes every corner with Swiss precision.
Tubeless-ready rims are compatible with both standard and tubeless-ready tires. When a tubeless-ready tire is mounted on a tubeless-ready rim with special tubeless rim tape, valve, and sealant, the tire and rim form an airtight chamber that no longer requires a tube. This lets you run lower tire pressure with less fear of pinch flats and without the added weight of a tube. Lower tire pressure has many benefits, including greater traction and lower rolling resistance over rough surfaces. The rim can always be used with a tube, as well, by simply removing the tubeless valve stem and installing a standard tube like you would with any non-tubeless tire.
Specs
| Size(s) | 700c |
|---|---|
| Rim Material | Aluminum |
| Rim Depth | 32mm |
| Rim Width |
18mm Inner 22mm Outer |
| Hub(s) |
DT 350 Centerlock 12x100mm (Front) 12x142mm (Rear) |
| Spokes (Front/Rear) | DT Aero Comp Straightpull |
| Holes (Front/Rear) | 24/24 |
| Nipples | DT ProLock Squorx ProHead Aluminum |
| Weight (Front/Rear) | 829g/958g |
| Cassette Compatibility | Shimano/SRAM 11-speed Road |
| Valve Type | Presta |
| Extras | TL Tape 21mm, TL Valve MTB+Road 40mm, IS 6-bolt Adapter Road, 5mm Endcap Kit; 15mm Endcap Kit (w/ Front Only) |
* Subject to change without notice.