Skip to main content

Jamis Hardline C2

Jamis Hardline C2
Please select options
Please call or email for availibility


If pedaling to explore the entire mountain and shredding every downhill is your thing, the Jamis Hardline C2 delivers. Its 160mm Fox Factory 36 FLOAT fork keeps your tire glued to your line of choice with another 160mm of rear travel lying in wait, built on a Fox Float DPX2 Factory Series Kashima EVOL shock and 3VO, one of the most advanced suspension designs available.

Its Stans Flow MK3 wheels and Vittoria Martello tires rail on sculpted park runs and rip through rooty enduro tracks without batting an eye. A Truvativ crank drives power into SRAM's 1x12-speed X01 Eagle drivetrain that shifts fast enough to keep up with your rowdiest descents, while providing a wide range that lets you self-shuttle and proudly earn your fun... and some bragging rights.

Push that fun envelope on the way down, because the 4-piston Magura MT7 brakes harness fade-free power from another realm to keep you just this side of too-fast, all while a Race Face Aeffect R dropper post supports you in a dialed position so you get the most out of every inch of trail.

Dropper posts

A dropper seatpost allows you to quickly lower and raise your seat to give you an ideal riding position. Dropping your seat creates a lower center of gravity for better control and maneuverability on steep descents, while raising it puts you at normal riding height for efficient pedaling.

Construction can include either hydraulic- or cable-actuated systems and the post’s travel can either be infinitely adjustable or stopped at set intervals, depending on the model.

Dropper seatposts come in standard lengths and diameters and vary by the amount of travel.


Frame Dyad Pro High Modulus Carbon Fiber, 160mm travel 3VO suspension, Enduro Max sealed bearing pivots, 1.5 - 1 1/8" tapered head tube, 12x148mm thru-axle, Internal dropper post routing, Custom Jamis upper chainguide mounts, ISCG05 lower chainguide mounts, 10mm hardware, replaceable derailleur hanger
Fork Fox Factory 36 Float 27.5" w/ 3-position adjust compression & lock-out,15x110mm axle, air spring compression, rebound adjust, tapered alloy steerer, 160mm travel
Headset FSA Orbit IS Integrated, 8mm cone spacer
Rear Shock Fox Float DPX2 Factory Series Kashima EVOL shock w/3-position compression
Axles Front: 110 x 15mm
Rear: 148 x 12mm
Rims/Wheels Stan's Flow MK3 27.5" tubeless wheels
Hubs Stan's NEO
Spokes Sapim Race
Tires Vittoria Martello 27.5 x 2.35", TNT tubeless
Crankset Truvativ Descendant Carbon
Chainrings 32T
Bottom Bracket SRAM DUB
Chain SRAM X01 Eagle, 12-speed
Rear Derailleur SRAM X01 Eagle, 12-speed
Cassette/Rear Cogs SRAM XG1295, 12-speed, 10-50T
Shifters SRAM X01 Eagle, 1x12-speed
Handlebars Race Face Turbine R, 780mm x 20mm rise, 35mm diameter
Tape/Grips Jamis Lock-On
Stem Race Face Turbine R, 50mm extension, 35mm clamp diameter
Brakes Magura MT7 4-piston hydraulic disc, Storm HC 180mm rotors
Saddle WTB Volt
Seat Post Race Face Aeffect R Dropper, 1x remote

* Subject to change without notice.